How to dissolve gel balls?

Dissolving gel balls (also known as Orbeez or gel blaster ammo) is an essential step to ensuring they’re ready for use in your gel blaster. If you’ve ever wondered how to properly hydrate or dissolve your gel balls, you’ve come to the right place. Here’s a quick guide on how to do it correctly.

1. Choose the Right Container

The first thing you’ll need is a container to hold the gel balls as they expand. A large bowl or bucket is ideal. You’ll want enough space for the gel balls to absorb water and grow to their full size.

2. Add the Gel Balls to the Container

Once you’ve chosen your container, add the dry gel balls (often sold in small, dehydrated form) to it. The amount you use will depend on how many you need for your game or gel blaster.

3. Fill the Container with Water

Fill your container with water — cold or room temperature is fine, as extreme temperatures aren’t necessary for the gel balls to absorb water. You’ll want to add at least 10 times the amount of water to the gel balls as they need to expand fully. For example, if you’re hydrating 1000 gel balls, add around 10 liters (2.6 gallons) of water.

4. Wait for the Gel Balls to Absorb Water

This is the most important step — patience! Once the gel balls are submerged in water, you’ll need to give them time to hydrate and expand. This process typically takes 4 to 6 hours, but for best results, it’s often recommended to let them soak overnight. The balls will absorb the water and grow to about 8 to 10 times their original size.

• Tip: If you want to speed up the process, you can gently stir the gel balls every hour or so, but don’t overdo it or the balls might burst prematurely.

5. Check for Proper Size

After the soaking period, check the gel balls to see if they’ve reached the proper size. They should feel squishy and jelly-like but not too soft or mushy. The ideal size for gel balls used in blasters is around 7-8mm in diameter. If they’re still small or hard, give them more time to absorb water.

6. Drain Excess Water

Once the gel balls have fully expanded, drain any excess water from the container. This will make the balls easier to load into your gel blaster without creating a mess. You can also use a fine mesh strainer or colander to help with this.

7. Store Gel Balls Properly

If you have leftover gel balls that you’re not going to use right away, you should store them in a sealed plastic bag or airtight container to keep them moist and fresh. Keep them in a cool, dry place, as prolonged exposure to air can cause them to dry out and shrink.

Important Tips:

• Avoid Overhydrating: Gel balls that have been soaked for too long can burst easily and become too soft to work well in your blaster. 12-24 hours of soaking is usually plenty for most gel balls.
• Use Clean Water: It’s always a good idea to use clean, filtered water to hydrate your gel balls. Contaminated or dirty water can affect the gel balls’ expansion and may even cause them to break down prematurely.
• Don’t Overload Your Gel Blaster: Even when fully hydrated, some gel blasters have specific capacities for gel balls, so make sure you don’t load more than the recommended amount.

Where to Buy Quality Gel Balls

If you’re looking for high-quality gel balls that expand well and fit your gel blaster perfectly, M416GelBlasters.com is a reliable source for all your gel blaster needs. They carry a variety of gel balls that are specially designed to provide the right balance of size, consistency, and durability, ensuring an optimal performance in your blaster.

Conclusion:

Hydrating gel balls is a simple process that requires patience, a little planning, and the right materials. With these steps, you’ll ensure your gel blaster is ready for action, and you can enjoy hours of blasting fun!